Search for: All records

Abstract Broadband radio waves emitted from pulsars are distorted and delayed as they propagate toward the Earth due to interactions with the free electrons that compose the interstellar medium (ISM), with lower radio frequencies being more impacted than higher frequencies. Multipath propagation in the ISM results in both later times of arrival for the lower frequencies and causes the observed pulse to arrive with a broadened tail described via the pulse broadening function. We employ the CLEAN deconvolution technique to recover the pulse broadening timescale and by proxy the intrinsic pulse shape. This work expands upon previous descriptions of CLEAN deconvolution used in pulse broadening analyses by parameterizing the efficacy on simulated data and developing a suite of tests to establish which of a set of figures of merit leads to an automatic and consistent determination of the scattering timescale and its uncertainty. We compare our algorithm to the cyclic spectroscopy method of estimating the scattering timescale, specifically to the simulations performed in Dolch et al. (2021). We test our improved algorithm on the highly scattered millisecond pulsar J1903+0327, showing the scattering timescale to change over years, consistent with estimates of the refractive timescale of the pulsar. 

Abstract Low-frequency solar radio emission is sourced in the solar corona, with sub-100 MHz radio emission largely originating from the ∼10⁵K plasma around 2 optical radii. However, the region of emission has yet to be constrained at 35–45 MHz due to both instrumentation limitations and the rarity of astronomical events, such as total solar eclipses, which allow for direct observational approaches. In this work, we present the results from a student-led project to commission a low-frequency radio telescope array situated in the path of totality of the 2024 total solar eclipse in an effort to probe the middle corona. The Deployable Low-Band Ionosphere and Transient Experiment (DLITE) is a low-frequency radio array comprised of four dipole antennas, optimized to observe at 35–45 MHz, and capable of resolving the brightest radio sources in the sky. We constructed a DLITE station in Observatory Park, a dark-sky park in Montville, Ohio. Results of observations during the total solar eclipse demonstrate that DLITE stations can be quickly deployed for observations and provide constraints on the radius of solar emission at our center observing frequency of 42 MHz. In this work, we outline the construction of DLITE Ohio and the solar observation results from the total solar eclipse that transversed North America in 2024 April. 

Abstract A pulsar’s scintillation bandwidth is inversely proportional to the scattering delay, making accurate measurements of scintillation bandwidth critical to characterize unmitigated delays in efforts to measure low-frequency gravitational waves with pulsar timing arrays. In this pilot work, we searched for a subset of known pulsars within ∼97% of the data taken with the Puerto Rico Ultimate Pulsar Processing Instrument for the AO327 survey with the Arecibo telescope, attempting to measure the scintillation bandwidths in the data set by fitting to the 2D autocorrelation function of their dynamic spectra. We successfully measured 38 bandwidths from 23 pulsars (six without prior literature values), finding that: almost all of the measurements are larger than the predictions from NE2001 and YMW16 (two popular galactic models); NE2001 is more consistent with our measurements than YMW16; Gaussian fits to the bandwidth are more consistent with both electron density models than Lorentzian ones; and for the 17 pulsars with prior literature values, the measurements between various sources often vary by a few factors. The success of Gaussian fits may be due to the use of Gaussian fits to train models in previous work. The variance of literature values over time could relate to the scaling factor used to compare measurements, but also seems consistent with time-varying interstellar medium parameters. This work can be extended to the rest of AO327 to further investigate these trends, highlighting the continuing importance of large archival data sets for projects beyond their initial conception. 

Abstract Pulsar timing array experiments have recently uncovered evidence for a nanohertz gravitational wave background by precisely timing an ensemble of millisecond pulsars. The next significant milestones for these experiments include characterizing the detected background with greater precision, identifying its source(s), and detecting continuous gravitational waves from individual supermassive black hole binaries. To achieve these objectives, generating accurate and precise times of arrival of pulses from pulsar observations is crucial. Incorrect polarization calibration of the observed pulsar profiles may introduce errors in the measured times of arrival. Further, previous studies have demonstrated that robust polarization calibration of pulsar profiles can reduce noise in the pulsar timing data and improve timing solutions. In this paper, we investigate and compare the impact of different polarization calibration methods on pulsar timing precision using three distinct calibration techniques: the Ideal Feed Assumption (IFA), Measurement Equation Modeling (MEM), and Measurement Equation Template Matching (METM). Three NANOGrav pulsars—PSRs J1643−1224, J1744−1134, and J1909−3744—observed with the 800 MHz and 1.5 GHz receivers at the Green Bank Telescope (GBT) are utilized for our analysis. Our findings reveal that all three calibration methods enhance timing precision compared to scenarios where no polarization calibration is performed. Additionally, among the three calibration methods, the IFA approach generally provides the best results for timing analysis of pulsars observed with the GBT receiver system. We attribute the comparatively poorer performance of the MEM and METM methods to potential instabilities in the reference noise diode coupled to the receiver and temporal variations in the profile of the reference pulsar, respectively. 

Abstract Based on the rate of change of its orbital period, PSR J2043+1711 has a substantial peculiar acceleration of 3.5 ± 0.8 mm s^–1yr^–1, which deviates from the acceleration predicted by equilibrium Milky Way (MW) models at a 4σlevel. The magnitude of the peculiar acceleration is too large to be explained by disequilibrium effects of the MW interacting with orbiting dwarf galaxies (∼1 mm s^–1yr^–1), and too small to be caused by period variations due to the pulsar being a redback. We identify and examine two plausible causes for the anomalous acceleration: a stellar flyby, and a long-period orbital companion. We identify a main-sequence star in Gaia DR3 and Pan-STARRS DR2 with the correct mass, distance, and on-sky position to potentially explain the observed peculiar acceleration. However, the star and the pulsar system have substantially different proper motions, indicating that they are not gravitationally bound. However, it is possible that this is an unrelated star that just happens to be located near J2043+1711 along our line of sight (chance probability of 1.6%). Therefore, we also constrain possible orbital parameters for a circumbinary companion in a hierarchical triple system with J2043+1711; the changes in the spindown rate of the pulsar are consistent with an outer object that has an orbital period of 60 kyr, a companion mass of 0.3M_⊙(indicative of a white dwarf or low-mass star), and a semimajor axis of 1900 au. Continued timing and/or future faint optical observations of J2043+1711 may eventually allow us to differentiate between these scenarios. 

Abstract We test the impact of an evolving supermassive black hole mass scaling relation (M_BH–M_bulge) on the predictions for the gravitational-wave background (GWB). The observed GWB amplitude is 2–3 times higher than predicted by astrophysically informed models, which suggests the need to revise the assumptions in those models. We compare a semi-analytic model’s ability to reproduce the observed GWB spectrum with a static versus evolving-amplitudeM_BH–M_bulgerelation. We additionally consider the influence of the choice of galaxy stellar mass function (GSMF) on the modeled GWB spectra. Our models are able to reproduce the GWB amplitude with either a large number density of massive galaxies or a positively evolvingM_BH–M_bulgeamplitude (i.e., theM_BH/M_bulgeratio was higher in the past). If we assume that theM_BH–M_bulgeamplitude does not evolve, our models require a GSMF that implies an undetected population of massive galaxies (M_⋆≥ 10¹¹M_⊙atz> 1). When theM_BH–M_bulgeamplitude is allowed to evolve, we can model the GWB spectrum with all fiducial values and anM_BH–M_bulgeamplitude that evolves asα(z) =α₀(1 +z)^1.04±0.5. 

Abstract Noise characterization for pulsar-timing applications accounts for interstellar dispersion by assuming a known frequency dependence of the delay it introduces in the times of arrival (TOAs). However, calculations of this delay suffer from misestimations due to other chromatic effects in the observations. The precision in modeling dispersion is dependent on the observed bandwidth. In this work, we calculate the offsets in infinite-frequency TOAs due to misestimations in the modeling of dispersion when using varying bandwidths at the Green Bank Telescope. We use a set of broadband observations of PSR J1643−1224, a pulsar with unusual chromatic timing behavior. We artificially restricted these observations to a narrowband frequency range, then used both the broad- and narrowband data sets to calculate residuals with a timing model that does not account for time variations in the dispersion. By fitting the resulting residuals to a dispersion model and comparing the fits, we quantify the error introduced in the timing parameters due to using a reduced frequency range. Moreover, by calculating the autocovariance function of the parameters, we obtained a characteristic timescale over which the dispersion misestimates are correlated. For PSR J1643−1224, which has one of the highest dispersion measures (DM) in the NANOGrav pulsar timing array, we find that the infinite-frequency TOAs suffer from a systematic offset of ∼22μs due to incomplete frequency sampling, with correlations over about one month. For lower-DM pulsars, the offset is ∼7μs. This error quantification can be used to provide more robust noise modeling in the NANOGrav data, thereby increasing the sensitivity and improving the parameter estimation in gravitational wave searches. 

Abstract Pulsar timing array observations have found evidence for an isotropic gravitational-wave background with the Hellings–Downs angular correlations between pulsar pairs. This interpretation hinges on the measured shape of the angular correlations, which is predominantly quadrupolar under general relativity. Here we explore a more flexible parameterization: we expand the angular correlations into a sum of Legendre polynomials and use a Bayesian analysis to constrain their coefficients with the 15 yr pulsar timing data set collected by the North American Nanohertz Observatory for Gravitational Waves (NANOGrav). When including Legendre polynomials with multipolesℓ≥ 2, we only find a significant signal in the quadrupole with an amplitude consistent with general relativity and nonzero at the ∼95% confidence level and a Bayes factor of 200. When we include multipolesℓ≤ 1, the Bayes factor evidence for quadrupole correlations decreases by more than an order of magnitude due to evidence for a monopolar signal at approximately 4 nHz, which has also been noted in previous analyses of the NANOGrav 15 yr data. Further work needs to be done in order to better characterize the properties of this monopolar signal and its effect on the evidence for quadrupolar angular correlations. 

Abstract Pulsar timing arrays (PTAs) are designed to detect low-frequency gravitational waves (GWs). GWs induce achromatic signals in PTA data, meaning that the timing delays do not depend on radio frequency. However, pulse arrival times are also affected by radio-frequency-dependent “chromatic” noise from sources such as dispersion measure (DM) and scattering delay variations. Furthermore, the characterization of GW signals may be influenced by the choice of chromatic noise model for each pulsar. To better understand this effect, we assess if and how different chromatic noise models affect the achromatic noise properties in each pulsar. The models we compare include existing DM models used by the North American Nanohertz Observatory for Gravitational waves (NANOGrav) and noise models used for the European PTA Data Release 2 (EPTA DR2). We perform this comparison using a subsample of six pulsars from the NANOGrav 15 yr data set, selecting the same six pulsars as from the EPTA DR2 six-pulsar data set. We find that the choice of chromatic noise model noticeably affects the achromatic noise properties of several pulsars. This is most dramatic for PSR J1713+0747, where the amplitude of its achromatic red noise lowers from ${\log }_{10}{A}_{\mathrm{RN}}=-{14.1}_{-0.1}^{+0.1}$to $-{14.7}_{-0.5}^{+0.3}$, and the spectral index broadens from ${\gamma }_{\mathrm{RN}}={2.6}_{-0.4}^{+0.5}$to ${\gamma }_{\mathrm{RN}}={3.5}_{-0.9}^{+1.2}$. We also compare each pulsar's noise properties with those inferred from the EPTA DR2, using the same models. From the discrepancies, we identify potential areas where the noise models could be improved. These results highlight the potential for custom chromatic noise models to improve PTA sensitivity to GWs.